aFe Power Press Release – New Magnum FLOW OER Air Filter for 2015 Audi A3/S3 L4-1.8L (t)/2.0L (t)!

November 7th, 2014 by Ernest Lo

aFe_30-10254

aFe is proud to introduce a new OE replacement filter for 2015 Audi A3/S3 with L4-1.8L/2.0L turbo (TFSI) engines. These filters are offered in two medias; Pro DRY S for maximum convenience, and Pro 5R for maximum airflow. These filters outflowed the stock paper filters by up to 50% providing performance without sacrificing protection. aFe Power’s performance air filters are constructed using full 360 degree urethane frames. This construction is very rigid and allows for a proper OE style fit with excellent filter strength. Washable and reusable for multiple cleanings, tall open rounded evenly-spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane bump seal insures a tight, leak-free seal over the life of the filter. Order Now! Pro 5R (P/N: 30-10254) or Pro DRY S (P/N: 31-10254)

For more information on these products, check out aFe.

aFe Power Press Release – New Carbon Fiber Engine Cover w/ Matte Finish for 2012-2015 BMW M5 (F10) V8-4.4L (tt)!

November 4th, 2014 by Ernest Lo

aFe_79-13002

aFe Power is proud to introduce the all new Carbon Fiber Engine Cover with Matte Finish for the 2012-2015 BMW M5 (F10) V8-4.4L (tt). If you’re looking to put some style under the hood of your BMW M5, aFe’s hand-crafted, matte carbon fiber engine cover will set you apart from the rest. It is no shock that this race-inspired material is a favorite of BMW drivers from around the world. This cover features 2×2 twill weave carbon fiber with a matte finish, while the underside has been smoothed to insure a high-quality all around finish. Your stock ‘M” emblem and rubber grommets are not included but are removed from the factory cover and reinstalled onto the aFe matte carbon fiber cover. This cover also fits the 2012-2015 M6 (F12/13) and 2013-2015 M6 Gran Coupe (F06) Pre-Order Now! Available late February (P/N: 79-13002)

For more information on this product, check out aFe Power.

aFe Power Press Release – 4″ DPF-Back Dual Side Exit Exhaust System for 2011-2014 Ford Diesel Trucks V8-6.7L (td)!

October 23rd, 2014 by Ernest Lo

aFe_49-43065-P

aFe Power is pleased to announce the release of new 4″ DPF-Back Dual Side Exit Exhaust Systems for the 2011-2014 Ford Diesel Trucks with V8-6.7L engine. These system are constructed from either 4″ mandrel-bent aluminized steel or stainless steel tubing. The smooth transition bends allow for low turbulence, increasing horsepower, torque. In house test results produced +8 horsepower and +11 lbs. x ft. of torque over the stock exhaust system. These systems are designed with Intercooling tailpipes to reduce exhaust gas temperatures. These systems all use factory mounting locations and come with high quality band clamps and OE-style bayonet hangers. This provides for a quick, hassle-free installation with no modifications necessary. Also included in these exhaust systems are a choice of massive dual, side exit 6″ polished or high temp black stainless steel tips, both with laser-cut stainless steel aFe power plates riveted on for an aggressive style. Order now!

MACH Force-Xp Stainless Steel DPF-Back with Polished Tips (P/N 49-43065-P) With Black Tips (P/N 49-43065-B)
ATLAS Aluminized Steel DPF-Back With Polished Tips (P/N 49-03065-P) With Black Tips (P/N 49-03065-B)

For more information on these products, check out aFe Power.

aFe Power Press Release – Magnum FLOW OER Air Filter for 2013-14 Porsche Boxster/S Cayman/S (981) H6-2.7L/3.4L!

October 17th, 2014 by Ernest Lo

aFe_10-10131

aFe is proud to introduce new OE replacement filters for 2013-2014 Porsche Boxster/S & Cayman/S (981) with H6-2.7L/3.4L engines. These filters are offered in two media: Pro DRY S for maximum convenience, and Pro 5R for maximum airflow. These filters outflowed the stock paper filters by 33% providing performance without sacrificing protection. The air filter frame is constructed using 100% polyurethane for long life and durability. This construction is rigid yet allows for a proper OE-style fit with excellent filter strength. Washable and reusable for multiple cleanings, rounded pleat design provide excellent dust holding capacity for longer service life between cleanings. Inside the box you will find two filters and all the necessary mounting hardware. Order Now! Pro 5R (P/N: 10-10131) or Pro DRY S (P/N: 11-10131)

For more information on these products, check out aFe Power.

aFe Power Press Release – New Magnum FORCE Stage-2 Intake System For 2009-14 VW Jetta (MKVI) L5-2.5L!

October 10th, 2014 by Ernest Lo

aFe_54-12492

aFe is proud to introduce the all new stage-2 intake system for 2009-2014 VW Jetta (MKVI) L5-2.5L engine. In our testing, this Stage-2 Intake System resulted in 13 horsepower and 12 lbs. x ft. torque max gain and outflowed the factory intake by up to 74%. This highly engineered system features a one-piece, durable 18-gauge, powder-coated heat-shield and a mandrel bent, wrinkle-black powder-coated aluminum intake tube. Improving airflow further is a large 7″ tall washable/reusable conical air filter. The air filter frame is constructed using 100% polyurethane for long life and multiple cleaning cycles. The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter to the heat shield providing a quick hassle-free installation with minimal hardware. Order Now! Pro 5R (P/N: 54-12492) or Pro DRY S (P/N: 51-12492).

For more information on these products, please visit aFe Power.

aFe Power Press Release – New 3″ DPF-Back Exhaust Systems for 2014 Ram 1500 EcoDiesel V6-3.0L (td)!

October 7th, 2014 by Ernest Lo

aFe_49-42045-P

aFe Power is pleased to announce the release of the new MACH Force-Xp 3″ DPF-Back Exhaust System for the 2014 RAM 1500 EcoDiesel Trucks with V6-3.0L (td) engine. This exhaust system is constructed out of 100% hand MIG-welded, mandrel-bent 3″ stainless steel tubing. The smooth curves and increased diameter of the exhaust system helps remove restriction and keep exhaust gas flowing smoothly for increased horsepower and torque, outflowing the factory exhaust system. In testing this DPF-Back exhaust system resulted in a max gain of +5 horsepower and +10 lbs. x ft. of torque verified by our in house dyno. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. This system comes complete with all necessary hardware including OE-style hangers with bayonet tips for great fitment. Finishing off the exhaust are a choice of either dual 5″ or massive 6″ matte-black or polished stainless steel clamp-on tips. A unique laser-cut aFe Power logo plate is riveted on the tips for an aggressive style. Order now! DPF-Back With 6″ Polished Tips (P/N 49-42044-P) DPF-Back With 6″ Matte-Black Tips (P/N 49-42044-B) DPF-Back With 5″ Polished Tips (P/N 49-42045-P) DPF-Back With 5″ Matte-Black Tips (P/N 49-42045-B)

For more information on these products, check out aFe Power.

Takeda Press Release – New Retain Intake System for 2013-2014 Lexus GS 350/F Sport V6-3.5L!

October 6th, 2014 by Ernest Lo

Takeda_TR-2015P-D

aFe Power is proud to introduce the all new Takeda Retain Stage-2 air intake system for 2013-2014 Lexus GS 350/F Sport with V6-3.5L engine. In our testing, this Stage-2 intake resulted in +13 horsepower and 11 lbs. x ft. of torque max gain and outflowed the factory intake by 38%. This highly engineered system features a one-piece, durable 18-gauge, powder-coated heat-shield and either a mandrel bent, wrinkle-black powder-coated aluminum intake tube or polished aluminum intake tube. The air filter frame is constructed using 100% polyurethane for long life and multiple cleaning cycles. Improving airflow further is a large 5″ tall washable/reusable conical air filter, which is mated to a 3-angle adaptor for a smooth transition from the filter into the intake tube. The kit comes complete with all necessary hardware. Order Now! Wrinkle-Black Tube Pro 5R (P/N: TR-2015B-R) or Polished Tube Pro DRY S (P/N: TR-2015P-D)

For more information on these products, check out aFe Power.

aFe Press Release – New Momentum GT Stage-2 Si Intake System 2007-2008 GM Gas Trucks/SUV’s V8 (GMT900)!

October 2nd, 2014 by Ernest Lo

aFe_51-74102

aFe is proud to introduce the all new Momentum GT sealed intake system for 2007-2008 GM Gas Trucks/SUV’s (GMT900) with V8 engines and equipped with electric fan. This all new Momentum GT intake system resulted in up to 8 horsepower and 11 lbs. x ft. torque max gain and outflowed the factory intake by 19%. This highly engineered intake system uses a smooth one-piece housing that keeps warm engine air out for maximum performance. The housing uses a unique patent pending filter-to-housing interface that enables us to use the largest filter possible while maintaining a simple hassle-free installation. The CAD designed intake tube is engineered to unleash all available horsepower and to fit perfectly. The kit comes complete with all necessary hardware. Order Now! Pro 5R (P/N: 54-74102) or Pro DRY S (P/N: 51-74102)

For more information on these products, check out aFe Power.

aFe Power Press Release – New BladeRunner Street Series Turbocharger for 2003-2007 Dodge Diesel Trucks L6-5.9L (td)!

September 26th, 2014 by Ernest Lo

aFe_46-60050

aFe Power is proud to introduce the all new BladeRunner turbocharger for the 2003 to 2007 Dodge Diesel Trucks with the L6-5.9L turbo diesel engine. The Street Series BladeRunner turbocharger is a brand new stock replacement unit with no core charge and comes with a 2-year warranty. This is a direct bolt-on replacement with all connections to the vehicle compatible with the OE geometry for a quick hassle-free installation. In testing this BladeRunner turbocharger produced a max gain of +10 horsepower and +28 lbs. x ft. of torque confirmed by our in house dyno. This turbo features a wastegate actuator that is mounted to the integrated cast bracket and comes preset to factory settings. An optional replacement turbine exhaust outlet is also available. Additional fueling is not required for improved performance over OE, but maximum gains are achieved from fuel system upgrades, either electronic or mechanical. Order Now! Turbocharger (P/N: 46-60050) or Replacement Turbine Exhaust Elbow (P/N: 46-60057)

For more information on these products, check out aFe Power.

aFe Power Press Release – New Magnum FLOW OER Air Filters For 2009-12 Porsche 911 (997.2) H6-3.6L/3.8L!

September 23rd, 2014 by Ernest Lo

aFe_10-10126

aFe is proud to introduce the new OE replacement filters for 2009-2012 Porsche 911 (997.2) with H6-3.6L/3.8L engines. These paired filters are offered in two medias; Pro DRY S for maximum convenience, and Pro 5R for maximum airflow. These filters outflowed the stock paper filters by 15% providing performance without sacrificing protection. These all new performance air filters are constructed using a ABS plastic top and polyurethane base with an internal expanded metal screen. This construction is rigid yet allows for a proper OE-style fit with excellent filter strength. These washable and reusable filters use a tall open rounded evenly-spaced pleat design which provides excellent dust holding capacity for longer service cycles between cleanings. The pliable polyurethane bump seal insures a tight, leak-free seal over the life of the filter. Order Now! Pro 5R (P/N: 10-10126) or Pro DRY S (P/N: 11-10126).

For more information on these products, please visit aFe.

© 2012 RPMWare Inc. All rights reserved.
Terms of Service